Contact Information

Stampings
2550 S 27th Avenue
Broadview, IL 60155 
920-261-2652 
sales@shakeproof.com

Pins
W6331 Bee Rd 
Watertown, WI 53098 
920-261-2652 
sales@shakeproof.com

Lock Washers
3704 N Palmer Rd 
Milwaukee, WI 53212 
920-261-2652 
sales@shakeproof.com

Threaded
W6331 Bee Rd 
Watertown, WI 53098 
920-261-2652 
sales@shakeproof.com

TEKS® Self-Drilling Fasteners

teks

Request a Quote

ITW Shakeproof TEKS® Self-Drilling Fasteners work great in both sheet metals and non-metals. Once the hole is drilled, the fastener taps the hole in the same way as thread forming or cutting screws do. The mating threads are created to match the threaded fastener perfectly. The screw is designed so that the drilling function is completed before the initial thread engages so that all voids and material thicknesses are accounted for.

Advantages:

  • Reduction in labor operations and time
  • Ideal for automated assembly
  • Reduces or eliminates the need for drill-bits
  • The proper hole size is always drilled
  • Eliminates torque variations caused by paint build-up, weld flash or foreign material

Available Features:

  • GER-NIB® - for particularly torque sensitive applications
  • SEMS - add a washer under the head to span larger holes, protect fragile surfaces, and distribute load.

GER-NIB® FEATURE: For particularly torque-sensitive applications, Shakeproof's torque-robbing Ger-Nib feature can be incorporated in the Teks fastener head.

TAPPING AND FASTENING: Once the hole is drilled, Teks fasteners tap the hole in the same way as thread forming or thread cutting screws do in a pre-drilled hole. Teks fasteners, however, provide two outstanding installation advantages over ordinary self-tapping screws:

  • By point design and diameter control, TOP MATERIAL TO BE DRILLED TOP MATERI BE DRILLED Teks fasteners always drill the proper hole for optimum fastening. The possibility of an incorrect hole diameter or an out-of-round condition is eliminated, assuring consistent driving and fastening torque.
  • Torque variations caused by paint build-up, weld flash or foreign material in pre-drilled or pre-punched holes are eliminated.

Teks pic

teks figure 1

Figure 1 shows a No. 8-18 Teks fastener drilling a hole in steel. Maximum drilling effi• ciency rs attained as it advances at the rate of .004" per revolution. The screw thread rate of advancement, however, is .055" per revolution. It is therefore essential that the drilling function be complete and the material be fully penetrated before the first screw thread engages. To meet this requirement, the unthreaded length of the Teks point must be equal to, or greater than, the material thickness to be drilled. It is important to understand that where more than one sheet of material is involved the calculation of the total thickness of the material to be drilled must include void; or spaces between the sheets.

Figure 2 illustrates three examples.

teks figure 2